How To Synchronize Your Harley® LED Turn Signals
How to preform a Turn Signal Sync
Welcome to the world of motorcycle LED lighting!
Harley-Davidson® motorcycles equipped with incandescent turn signal light bulbs that have been replaced with LED turn signals will need to perform one of these turn signal sync processes below. Doing this sync process will allow your new HOGWORKZ® turn signals to function properly.
2014 and newer models with canbus / BCM electrical systems:
- Turn the Ignition on, but do not start the bike
- Turn on your 4 way hazards by pressing the hazard button on the controls
- Turn the Ignition off letting hazards run. If the bike has security they will flash 5 or 6 times and then pause. This is expected. They will go back to flashing normal hazard mode
- Let hazards run 1-2 minutes
- Turn the ignition back on
- Turn the ignition off and then back on
- Check the function of both turn signals
2001-2016 models equipped with a TSSM (Turn Signal Security Module) and are non-canbus / BCM
- Turn the ignition on, but do not start the bike.
- Turn on the RIGHT side turn signal and let it flash 2 times
- Turn on the LEFT side turn signal and let it flash 2 times
- Turn on the RIGHT side turn signal again and let flash a minimum of 10 times
- Turn on the LEFT side turn signal again and let flash a minimum of 10 times
- Turn the ignition key off and then back on.
- Check the function of the turn signals
- Thanks for riding with HOGWORKZ!
22 Comment(s)
Eric Adkins
Oct 03, 2024 13:00
Does this procedure only work with specific manufacturers of lights? I have a 2006 FXSTBI Softail Night Train and I've tried this several times and cannot get the hyper flash to stop after installing all LED lights.
HOGWORKZ
Oct 03, 2024 13:41
Give our team a call at 888-615-6344 or email support@hogworkz.com we help best from there.
Jamie Henderson
Jul 27, 2024 10:37
Have the same issue as Adam. Have a 2022 street glide special. All blinkers work normal, but turn signal on dash has a hyper flash like a build is out, it's a pattern blinking.
Dean Hodges
Sep 11, 2024 12:05
Any news on the hyper flash? Have the same issue on my ‘21 road king
HOGWORKZ
Sep 13, 2024 08:10
Give our team a call at 888-615-6344 or email support@hogworkz.com we help best from there.
Adam Gilley
Jun 07, 2024 09:27
2019 Road king my hyper flash is not bulbs but on turn signal display how do i correct that. The turn signals them selves flash fine.
Scott Gifford
Mar 23, 2024 21:32
My turn signal flash fast and throw low voltage bcm codes
Daniel Hennon
Mar 09, 2024 01:23
Having issues have done the rest many times still no front left signal working. For the price paid shouldn't have these issues, paid high dollar expect top notch products, not to have to email or call
HOGWORKZ
Mar 11, 2024 08:45
Unfortunately you'll have to give our team a call: 888-615-6344