Color Matched Outer Fairing Skirt for Harley® Touring '14-'23 Installation
The details make the difference! Instantly upgrade your Harley® with a Color Matched Outer Fairing Skirt. Alex walks you through this easy install.
1. Loosen/Remove Blinker and Lower Fairing Bolts:
- Using a T27 Torx bit, loosen and/or remove the lower fairing bolts. There's one on each side.
- Depending on your blinker setup, you might need to remove the entire blinker or just the lower screw. In some cases, you can loosen the top blinker screw and rotate the blinker out of the way. The fairing skirt cover bolts in through your bottom blinker bolt.
- Remove the lower front panel screw. This will give you some wiggle room to move the front fairing forward.
2. Remove the OEM Fairing Skirt:
- Once everything is loosened, gently move the front fairing forward a little. Your OEM fairing skirt should then slide right out.
3. Slide in Your Color-Matched Fairing Skirt:
- Take your new HogWorkz outer fairing skirt cover and slide it into place, following the reverse of the removal process.
4. Reinstall Front Fairing and Turn Signal Screws:
- Reinstall the lower front fairing screws.
- Reinstall your lower blinker screw. This screw is crucial as it holds the new panel in place.
- If you only loosened your top blinker screw, remember to re-tighten it.
